mohit AI 语音生成器，来自 Fish Audio
生成由1+创作者信赖的mohit语音。使用AI文本转语音创建high-quality语音。
由 Fish Audio S1 驱动
如何使用 mohit 语音生成器
3个简单步骤即可创建专业配音
02
生成音频
点击生成，让 mohit 的声音为您的文本注入生命
- 数秒内获得录音棚级品质效果
- 100% 免费试用 • 无需信用卡
1+ 位创作者已使用此声音
mohit
由 Mohit KapilI've already opened right here got a very complicated model with four b2s let's take a look at our guids so I'm going to go select this here and open up a little report that I created so we can view these goids let me go ahead and move this up there we go so what I want to point out here is that these are the manufacturing guids and we'll be able to see when things change of the guid the impact so we look at this right here this is your actual member or assembly good then the next part right here this is your main material good and I will stress again and again that this assembly good does not change okay it'll remain the same and I'm going to prove that to you right now let's just take this and minimize this for the moment I'm going to select these members and send this off to my power Fab again I already set out the default so I don't have to worry about messing around with this going to go and hit okay and then move to my techla powerfab here we go let's go ahead and import grab the file that I just sent out right now and import I'll make this kind of quick this is the mapping file here I can go ahead it already detected but you can open up the mapping file and you can make modifications on how you want certain pieces of data mapped leave that for another lesson let's go ahead import now we can see that it is adding the B2 we want to make sure that we're clear that it's adding a B2 because it's a new member and like I said I didn't send any drawings or CNC so when we go and take a look at this project you can see that we have quantity of four b2s let's go back and talk a little bit more about the goods again I'm going to make a modification let's change this to a good old 14x 34 always liked them because they had more meat on them there we go and I'm just going to change this one now let's go and take a look notice the piec Mark's been updated let's go and take a look at the guids now and what I'm trying to get across right here is that even though I'm making this change to the main material you're going to notice Let me just go ahead and pull these down a little bit just to make this a little easier to see okay so you're going to notice that right here we have again the assembly guid or member guid has not changed but we did make a change to the main material and you can see that a new good was assigned to the main material okay let's make one more change and again I could do this all day and I did I went through a lot of things trying to see if I could change that assembly good and it never changed as long as that member existed it did not change let's go and grab this and I'll just do a simple member stretch we're going to make this 12 in just bring this out a foot and let's go ahead and look at our good again bring this down here hopefully that should be good enough right here to look at the different goids there we go maybe close but not close enough there we go so now in this case again the assembly guid Remains the Same see the assembly guid is remaining the same but the funny thing about this cuz it was a stretch I didn't replace the section size I still have the same good for the main material again my main point is that assembly good and that's what power faab is looking at is that assembly good and that's going to make a difference between an ADD
1 年前
en
245/500